Buscar
Mostrando ítems 1-10 de 12
Mechanical properties and behaviour of in situ materials which are stabilised with bitumen emulsion
(Taylor & Francis, 2013)
[Abstract:] This article presents a critical review of the mechanical properties of in situ materials which are stabilised with bitumen emulsion. A description is provided of the types of materials that are stabilised with ...
Nonlinear elasto–plastic performance prediction of materials stabilized with bitumen emulsion in rural road pavements
(Elsevier, 2016)
[Abstract:] This article presents numerical modelling of rural road pavement sections recycled in situ with two materials stabilized with bitumen emulsion. The two materials stabilized with bitumen emulsion are base course ...
Assessment of Two Laboratory Design Methods for CIR Mixtures With Bitumen Emulsion Based on Static and Gyratory Compaction
(Elsevier, 2020)
[Abstract] To expand the body of knowledge regarding cold in-place recycled mixtures, this study presents two different laboratory design methods. The main differences between the methods are the compaction procedures ...
Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial Tests
(Elsevier, 2022)
[Abstract] The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a circular economy. Triaxial tests have proven to be suitable for studying the mechanical behaviour of cold mixtures. In ...
Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion
(Elsevier, 2014-03-31)
[Abstract] The incorporation of recycled concrete aggregates (RCA) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. To date, several investigations have examined the use of this type of waste ...
Numerical Simulation of Bitumen Emulsion-Stabilised Base Course Mixtures With C&D Waste Aggregates Considering Nonlinear Elastic Behaviour
(Elsevier, 2020)
[Abstract:] This study presents the numerical modelling of a load-volume road pavement section with bitumen emulsion-stabilised base courses. The base courses used natural and construction and demolition aggregates. A 3D ...
Short-Term Resilient Behaviour and Its Evolution With Curing in Cold In-Place Recycled Asphalt Mixtures
(Elsevier, 2022)
[Abstract] This study evaluates the short-term resilient behaviour of cold in-place recycled (CIR) asphalt mixtures with bitumen emulsion when they are more similar to non-cohesive granular materials than to conventional ...
Laboratory and field performances of grave emulsion manufactured using nanocellulose crystals as an asphalt-emulsion emulsifier
(Taylor & Francis, 2023)
[Abstract:] This research examines the feasibility of substituting commercial emulsifiers made by the chemical and petrochemical industries with nanocellulose. To achieve this, various bitumen emulsions are created using ...
Compaction and Volumetric Analysis of Cold in-Place Recycled Asphalt Mixtures Prepared Using Gyratory, Static, and Impact Procedures
(Elsevier, 2021)
[Abstract] Compaction is one of the most important factors to be considered while manufacturing laboratory samples of cold in-place recycled (CIR) mixtures.
In this study, the effect of three laboratory compaction ...
Evaluation of water loss and stiffness increase in cold recycled mixes during curing
(Elsevier, 2023)
[Abstract:] Implementing cold solutions is one of the primary efforts in the road sector to counteract CO2 emissions and climate change. Using cold recycled mixtures (CRM) permits the reuse of up to 100% of reclaimed asphalt ...