Buscar
Mostrando ítems 1-10 de 96
Feasibility of Using a Lignin-Containing Waste in Asphalt Binders
(Springer, 2020)
[Abstract:] A lot of water waste streams are produced during the production of hardboard panels. This paper analyses the feasibility of using a lignin-containing waste from the hardboard industry in asphalt binders. It ...
Numerical Simulation of Bitumen Emulsion-Stabilised Base Course Mixtures With C&D Waste Aggregates Considering Nonlinear Elastic Behaviour
(Elsevier, 2020)
[Abstract:] This study presents the numerical modelling of a load-volume road pavement section with bitumen emulsion-stabilised base courses. The base courses used natural and construction and demolition aggregates. A 3D ...
Feasibility of using recycled concrete aggregates on half-warm mix asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt (HWMA) instead ...
Estudio del efecto de ceras reductoras de la viscosidad en un betún modificado con caucho
(Asociación Española de la Carretera, 2013)
[Resumen:] Debido a una creciente preocupación sobre el calentamiento global, la industria de las mezclas bituminosas está haciendo un constante esfuerzo para lograr disminuir sus emisiones mediante la reducción de las ...
Performance of Bituminous Mixtures Involving Construction and Demolition Waste
(Taylor & Francis Online, 2020)
[Abstract:] The incorporation of recycled concrete aggregates (RCA) from construction and demolition waste (CDW) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. This paper describes a laboratory ...
Evaluation of the Resilient Modulus of Hot-Mix Asphalt Made With Recycled Concrete Aggregates From Construction and Demolition Waste
(MDPI, 2020)
[Abstract] This paper reports the influence of the percentage of recycled aggregate (RCA) from construction and demolition waste (C&DW) together with the percentage of binder (L), curing time (t) and temperature (T) of the ...
Physical and hydraulic properties of porous concrete
(MDPI, 2021)
[Abstract:] The work presented includes a review of the state of art of porous concrete. Its purpose is to evaluate the potential use of porous concrete in constructions where the level of surface runoff justifies it. A ...
Short-Term Resilient Behaviour and Its Evolution With Curing in Cold In-Place Recycled Asphalt Mixtures
(Elsevier, 2022)
[Abstract] This study evaluates the short-term resilient behaviour of cold in-place recycled (CIR) asphalt mixtures with bitumen emulsion when they are more similar to non-cohesive granular materials than to conventional ...
Valorisation of Lignin-Rich Industrial Byproduct Into Half-Warm Mix Reclaimed Asphalt With Enhanced Performance
(Elsevier, 2022)
[Abstract] To promote a circular economy and sustainable development, the possibility of using a lignin-rich industrial byproduct as a partial substitute for asphalt emulsions in road pavements is analysed. A half-warm mix ...
Laboratory and field performances of grave emulsion manufactured using nanocellulose crystals as an asphalt-emulsion emulsifier
(Taylor & Francis, 2023)
[Abstract:] This research examines the feasibility of substituting commercial emulsifiers made by the chemical and petrochemical industries with nanocellulose. To achieve this, various bitumen emulsions are created using ...