Mostrando ítems 1-20 de 28
-
Comparing the Microstructure and Photovoltaic Performance of 3 Perylene Imide Acceptors With Similar Energy Levels but Different Packing Tendencies
(Royal Society of Chemistry, 2022)[Abstract] While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through ... -
Crystallization-Induced Gelling as a Method to 4D Print Low-Water-Content Non-isocyanate Polyurethane Hydrogels
(American Chemical Society, 2021)[Abstract] The use of three-dimensional (3D) printable hydrogels for biomedical applications has attracted considerable attention as a consequence of the ability to precisely define the morphology of the printed object, ... -
Dense Matrix Multiplication Algorithms and Performance Evaluation of HPCC in 81 Nodes IBM Power 8 Architecture
(MDPI, 2021-08)[Abstract] Optimizing HPC systems based on performance factors and bottlenecks is essential for designing an HPC infrastructure with the best characteristics and at a reasonable cost. Such insight can only be achieved ... -
Effect of different plasticizers on thermal, crystalline, and permeability properties of Poly(3–hydroxybutyrate–co-3–hydroxyhexanoate)films
(MDPI, 2022-08-22)Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) films were prepared using a cast film technique. Dioxane was chosen over other polymer solvents as it resulted in homogenous films with better morphology. Several ... -
Enhanced Organic Electrochemical Transistor Performance of Donor–Acceptor Conjugated Polymers Modified with Hybrid Glycol/Ionic Side Chains by Postpolymerization Modification
(American Chemical Society, 2023-04-11)[Abstract] Emergent bioelectronic technologies are underpinned by the organic electrochemical transistor (OECT), which employs an electrolyte medium to modulate the conductivity of its organic semiconductor channel. Here ... -
Enhancement of 3D Printability by FDM and Electrical Conductivity of PLA/MWCNT Filaments Using Lignin as Bio-Dispersant
(MDPI, 2023-02-17)[Abstract] To increase the applications of FDM (fusion deposition modeling) 3D printing in electronics, it is necessary to develop new filaments with good electrical properties and suitable processability. In this work, ... -
Experimental and Numerical Investigation of the Extrusion and Deposition Process of a Poly(lactic Acid) Strand with Fused Deposition Modeling
(MDPI, 2020)[Abstract] In the last decade, Fused Deposition Modeling (FDM) has gained popularity for allowing the fabrication of pieces with complex shapes. The final quality of the pieces is strongly linked to the shape, size and ... -
Experimental studies on TiO2 NT with metal dopants through co-precipitation, sol–gel, hydrothermal scheme and corresponding computational molecular evaluations
(MDPI, 2023-04-13)[Abstract] In the last decade, TiO2 nanotubes have attracted the attention of the scientific community and industry due to their exceptional photocatalytic properties, opening a wide range of additional applications in the ... -
Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors
(Wiley, 2022-07)[Abstract] The development of tunable UV-curable polymeric composites for functional applications, taking into consideration environmental issues and additive manufacturing technologies, is a research topic with relevant ... -
Flexible thermoelectric energy harvesting system based on polymer composites
(Elsevier, 2023-10)[Abstract] Flexible and easy processing lightweight thermoelectric materials for energy harvesting applications have shown an increasing interest. Thermoplastic polyvinylidene fluoride (PVDF) and elastomer styrene-ethyle ... -
Improvement of Endothelial Function by Gunnera Tinctoria Extract With Antioxidant Properties
(Springer Nature, 2020)[Abstract] Background: Gunnera tinctoria has been collected by Mapuche-Pewenche people for food and medicinal purposes. The high polyphenol content of methanolic extract from G. tinctoria leaves with chemical constituents ... -
Influence of Backbone Curvature on the Organic Electrochemical Transistor Performance of Glycolated Donor–Acceptor Conjugated Polymers
(Wiley-VCH, 2021-09)[Abstract] Two new glycolated semiconducting polymers PgBT(F)2gT and PgBT(F)2gTT of differing backbone curvatures were designed and synthesised for application as p-type accumulation mode organic electrochemical transistor ... -
Influence of the Hydrophilicity of Montmorillonite on Structure and Properties of Thermoplastic Wheat Starch/Montmorillonite Bionanocomposites
(John Wiley & Sons Ltd, 2021-11)[Abstract] The increasing environmental pollution with petroleum-based plastics has advanced research on biodegradable polymers. Thermoplastic starch (TPS) is one promising candidate due to wide availability from various ... -
Injectable hybrid hydrogels physically crosslinked based on carrageenan and green graphene for tissue repair
(Elsevier, 2023-04)[Abstract] Injectable and biocompatible novel hybrid hydrogels based on physically crosslinked natural biopolymers and green graphene for potential use in tissue engineering are reported. Kappa and iota carrageenan, locust ... -
Isosorbide Plasticized Corn Starch Filled With Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) Microparticles: Properties and Behavior Under Environmental Factors
(Elsevier, 2022-03)[Abstract] In this work, new green and fully biodegradable composites, based on corn starch, plasticized with two different amounts of isosorbide and filled by poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microparticles, ... -
Last Developments in Polymers for Wearable Energy Storage Devices
(Wiley, 2022-06-25)[Abstract] Our modern and technological society requests enhanced energy storage devices to tackle the current necessities. In addition, wearable electronic devices are being demanding because they offer many facilities ... -
Lignin as a high-value bioaditive in 3D-DLP printable acrylic resins and polyaniline conductive composite
(MDPI, 2022-10-04)[Abstract]: With increasing environmental awareness, lignin will play a key role in the transition from the traditional materials industry towards sustainability and Industry 4.0, boosting the development of functional ... -
Moving to e-Service Learning in Higher Education
(MDPI, 2022)[Abstract] Service Learning is a methodology in which students achieve academic and transversal competences related to the curriculum of a subject while performing a service for the benefit of the community. With the ... -
Physical Aging Behavior of a Glassy Polyether
(MDPI, 2021)[Abstract] The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, ... -
Polyethylene/ Poly(3-hydroxybutyrate-co-3-hydroxyvalerate /Carbon Nanotube Composites for Eco-Friendly Electronic Applications
(Elsevier, 2022-08)[Abstract] The development of new conducting composites, for electric and electronic applications, with lower environmental impact is a relevant issue. Blending poly (3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) with ...
