Buscar
Mostrando ítems 1-10 de 11
Hot mix asphalt using C&D waste as coarse aggregates
(Elsevier, 2012-04)
[Abstract] This article evaluates the possibility of designing hot asphalt mix road pavements using Construction and demolition waste as coarse recycled aggregates. The percentages of recycled aggregates used in the mixtures ...
Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures
(Elsevier, 2014)
[Abstract:] Cold asphalt mixtures (CAM) with 100% recycled aggregates from construction and demolition waste (CDW) were researched to ecologically and economically improve cold asphalt mixtures. The present study indicates ...
Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates
(Elsevier, 2015)
[Abstract:] In this study, the nonlinear elastic behavior of bitumen-stabilized materials with emulsion (BSM-E)1 with recycled aggregates from construction and demolition (C&D)2 waste was analyzed using dynamic triaxial ...
Recycled construction and demolition waste in Cold Asphalt Mixtures : evolutionary properties
(Elsevier, 2016)
[Abstract:] The use of Cold Asphalt Mixtures (CAM) usually results in financial and environmental saving, while decreasing pollution and occupational hazards. However, they require a length of curing time to reach their ...
Binder–aggregate adhesion and resistance to permanent deformation of bitumen-emulsion-stabilized materials made with construction and demolition waste aggregates
(Elsevier, 2016)
[Abstract:] Bitumen-stabilized materials with emulsion (BSM-E) are gaining increasing importance within the scope of road pavement engineering and the fight against climate change. Both environmental and economic aspects ...
Stripping in hot mix asphalt produced by aggregates from construction and demolition waste
(SAGE Journals, 2012)
[Abstract:] This paper analyses the effect of water on the durability of hot asphalt mixtures made with recycled aggregates from construction and demolition debris. Indirect tensile stress tests were carried out to evaluate ...
Mechanical behavior of hot-mix asphalt made with recycled concrete aggregates from construction and demolition waste: a design of experiments approach
(MDPI, 2019)
[Abstract:] The present work is a re-evaluation of previous research on the durability of hot-mix
asphalt made with recycled concrete aggregates from construction and demolition waste (CDW) with
a different approach. ...
Effect of ageing time on properties of hot-mix asphalt containing recycled concrete aggregates
(Elsevier, 2014-02-15)
[Abstract] This study describes a laboratory evaluation on the effect of ageing time on the primary properties of hot-mix asphalt (HMA) containing recycled concrete aggregates (RCA) from construction and demolition waste ...
Performance of Bituminous Mixtures Involving Construction and Demolition Waste
(Taylor & Francis Online, 2020)
[Abstract:] The incorporation of recycled concrete aggregates (RCA) from construction and demolition waste (CDW) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. This paper describes a laboratory ...
Evaluation of the Resilient Modulus of Hot-Mix Asphalt Made With Recycled Concrete Aggregates From Construction and Demolition Waste
(MDPI, 2020)
[Abstract] This paper reports the influence of the percentage of recycled aggregate (RCA) from construction and demolition waste (C&DW) together with the percentage of binder (L), curing time (t) and temperature (T) of the ...