Buscar
Mostrando ítems 61-69 de 69
Comparison of accelerated laboratory curing and maturation under uncontrolled conditions of gravel emulsions using a nonlinear weighted least-squares predictive model
(Taylor & Francis, 2022)
[Abstract:] Cold-asphalt mixtures (CAMs) are evolved materials whose mechanical strength increases with their maturation. The relationship between CAM field maturation and laboratory-accelerated cure procedures is not well ...
Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP
(Elsevier, 2022)
[Abstract:] The use of cold recycled asphalt mixtures (CRM) has been soaring during recent years. Reclaimed Asphalt Pavement (RAP) is the main component of CRM, and despite the numerous studies on CRM, the impact of different ...
Compaction and Volumetric Analysis of Cold in-Place Recycled Asphalt Mixtures Prepared Using Gyratory, Static, and Impact Procedures
(Elsevier, 2021)
[Abstract] Compaction is one of the most important factors to be considered while manufacturing laboratory samples of cold in-place recycled (CIR) mixtures.
In this study, the effect of three laboratory compaction ...
Use of lignocellulosic liquid waste from wood hardboard manufacture as bitumen emulsion extender for cold asphalt mixtures for low traffic roads
(2022)
[Abstract:] During the wet process of manufacturing wood hardboards, a large amount of water contaminated with lignocellulosic waste is generated. With the aim of promoting the circular economy, it is interesting to find ...
Laboratory evaluation of environmentally friendly alternative mineral powders for micro-surfacing treatments manufacture
(Elsevier, 2023)
[Abstract:] The effectiveness of using alternative environmentally friendly and cost-effective mineral powders to manufacture micro-surfacing treatments is examined. Four mineral powders (calcium carbonate, dolomite, PAVAL, ...
Comportamiento mecánico de mezclas bituminosas recicladas en frío con emulsión: sostenibilidad y economía circular en el sector de la pavimentación
(Asociación Española de la Carretera, 2023)
[Resumen:] Durante esta investigación, se analizó el comportamiento de mezclas bituminosas recicladas en frío con emulsión bituminosa y 100% de material fresado (RAP). Se evaluaron su compactabilidad y propiedades volumétricas ...
Moisture damage resistance of grave emulsion manufactured with waste biomass fly ashes
(Springer, 2020)
[Abstract:] PURPOSE: Biomass combustion is an economic and environmentally friendly source of energy with a growing demand. Nevertheless, the environmental management of fly ashes generated during energy production must ...
Laboratory and field performances of grave emulsion manufactured using nanocellulose crystals as an asphalt-emulsion emulsifier
(Taylor & Francis, 2023)
[Abstract:] This research examines the feasibility of substituting commercial emulsifiers made by the chemical and petrochemical industries with nanocellulose. To achieve this, various bitumen emulsions are created using ...
Proyecto EMULCELL: nuevas emulsiones bituminosas fabricadas con nanocelulosas. Resultados preliminares
(2021)
[Resumen:] En la presente investigación se detallan los resultados de la investigación preliminar
llevada a cabo en el marco del proyecto EMULCELL. Este proyecto nace con el objetivo
de desarrollar nuevos tipos de ...