Buscar
Mostrando ítems 1-10 de 45
Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates
(Elsevier, 2015)
[Abstract:] The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity ...
Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler
(Elsevier, 2016)
[Abstract:] Certain paper industry wastes display high recycling potential. In this investigation, the feasibility of using green liquor dregs and biomass fly ash from the paper industry as filler in hot-mix asphalt (HMA) ...
Hot mix asphalt using C&D waste as coarse aggregates
(Elsevier, 2012-04)
[Abstract] This article evaluates the possibility of designing hot asphalt mix road pavements using Construction and demolition waste as coarse recycled aggregates. The percentages of recycled aggregates used in the mixtures ...
Effects of the asphalt penetration grade and the mineralogical composition on the asphalt-aggregate bond
(Taylor & Francis, 2014)
[Abstract:] This investigation analyzes the loss of bonding between the asphalt binder and the aggregate particles produced by water in hot-mix asphalt pavements. Three asphalt penetration grades were used: B35/50, B50/70, ...
Recycled construction and demolition waste in Cold Asphalt Mixtures : evolutionary properties
(Elsevier, 2016)
[Abstract:] The use of Cold Asphalt Mixtures (CAM) usually results in financial and environmental saving, while decreasing pollution and occupational hazards. However, they require a length of curing time to reach their ...
Mezclas asfálticas dosificadas con RCD para carreteras de bajo tráfico
(Entorno Gráfico, 2009)
[Resumen:] En este artículo se estudia la viabilidad técnica de utilizar áridos procedentes de residuos de construcción y demolición en mezclas asfálticas en caliente. Se eligió una mezcla gruesa con diferentes porcentajes ...
Feasibility of Using Recycled Concrete Aggregates for Half-Warm mix Asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and
demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt
(HWMA) instead ...
Characterization of hot-mix asphalt made with recycled concrete aggregates that have been cured for 4 hours in the oven
(Trans Tech Publications, 2014)
[Abstract:] In this research a laboratory characterization of hot-mix asphalt (HMA) made with recycled concrete aggregates (RCA) from construction and demolition waste (CDW) as base layer in road construction has been ...
The influence of the mineral filler on the adhesion between aggregates and bitumen
(Elsevier, 2015)
[Abstract:] The loss of adhesion is a major mechanism of physical distress in hot-mix asphalt (HMA) because it could reduce the durability of HMA. In this study, active and passive adhesion between the aggregates and the ...
Adhesion of recycled concrete aggregates, demolition debris and asphalt
(Taylor & Francis, 2014)
[Abstract:] In this investigation, rolling bottle tests and boiling water tests were conducted to evaluate the effect of different fillers and treatments on the adhesion between recycled concrete aggregates (RCA) and ...