Selection of an Appropriate Pre-Injection Pattern in a Marine Diesel Engine Through a Multiple-Criteria Decision Making Approach
![Thumbnail](/dspace/bitstream/handle/2183/38320/Lamas_Galdo_Maria_Isabel_2020_Selection_of_an_Appropriate_Pre_Injection_Pattern.pdf.jpg?sequence=6&isAllowed=y)
Ver/ abrir
Use este enlace para citar
http://hdl.handle.net/2183/38320
A non ser que se indique outra cousa, a licenza do ítem descríbese como Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
Coleccións
- GI-SISTER - Artigos [37]
Metadatos
Mostrar o rexistro completo do ítemTítulo
Selection of an Appropriate Pre-Injection Pattern in a Marine Diesel Engine Through a Multiple-Criteria Decision Making ApproachData
2020-04-04Cita bibliográfica
Lamas Galdo, M.I.; Castro-Santos, L.; Rodríguez Vidal, C.G. Selection of an Appropriate Pre-Injection Pattern in a Marine Diesel Engine Through a Multiple-Criteria Decision Making Approach. Appl. Sci. 2020, 10, 2482. https://doi.org/10.3390/app10072482
Resumo
[Abstract] In the present work, a numerical model was developed to analyze a commercial diesel engine. The adequacy of this model was validated using experimental results. This model was employed to study several pre-injection strategies. Particularly, the pre-injection rate, duration and starting instant were analyzed in the ranges 5% to 25%, 1◦ to 5◦ and −22◦ to −18◦, respectively. The effect on consumption and emissions of NOx, CO, and HC wereas evaluated. Since some of these configurations have opposite effects on consumption and/or emissions, it is necessary to develop a formal tool to characterize the most appropriate injection pattern. To this end, a multiple-criteria decision making approach was employed. It was found that the injection duration must remain as low as possible due to significant reductions in NOx. The most appropriate injection pattern resulted 1◦ pre-injection duration, 20% pre-injection rate, and −19◦ pre-injection starting instant. This configuration leads to increments of 6.7% in consumption, 3.47% in CO, and 3.83% in HC but reduces NOx by 34.67% in comparison with the case without pre-injection.
Palabras chave
MCDM
CFD
Engine
Emissions
Consumption
CFD
Engine
Emissions
Consumption
Versión do editor
Dereitos
Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
ISSN
2076-3417