The Hybrid Joints between an FRP Panel and a Steel Panel through Tubular Reinforcements: A Methodology for Interlaminar Stress Calculations
Use este enlace para citar
http://hdl.handle.net/2183/37307
A non ser que se indique outra cousa, a licenza do ítem descríbese como Attribution 4.0 International
https://creativecommons.org/licenses/by/4.0/
Coleccións
- CIT-GEM - Artigos [21]
Metadatos
Mostrar o rexistro completo do ítemTítulo
The Hybrid Joints between an FRP Panel and a Steel Panel through Tubular Reinforcements: A Methodology for Interlaminar Stress CalculationsData
2020-06-07Cita bibliográfica
Domínguez, F.; Carral, L. The Hybrid Joints between an FRP Panel and a Steel Panel through Tubular Reinforcements: A Methodology for Interlaminar Stress Calculations. Appl. Sci. 2020, 10, 3962. https://doi.org/10.3390/app10113962
Resumo
[Abstract]: The advantages of laminates in terms of the chemical properties and mechanical
properties/weight relationship have motivated several applications of fiber-reinforced plastic (FRP)
composites in naval constructions due to the reduction in structural weight. This weight advantage has
motivated multiple investigations dedicated to dissimilar material joints. We present a methodology
for the interlaminar stress calculations of a tubular hybrid joint between an FRP panel and a steel
panel through tubular reinforcements. The proposed formulas allow the estimation of the shear and
normal stresses on the adhesive, which are generated in the bonding angle of the tubular hybrid
joint. The stresses generated at the adhesive bonding ends influence on the adherent’s adjacent layer.
A failure criterion is shown to check the accomplishment of the resulting stresses in the adherent
laminate. Finally, the proposed formulas are validated using the finite element method and compared
with the obtained interlaminar stresses.
Palabras chave
Hybrid joint
Adhesive single-lap joint
Interlaminar stress
Tubular reinforcement joint
Marine applications
Composite
Adhesive single-lap joint
Interlaminar stress
Tubular reinforcement joint
Marine applications
Composite
Versión do editor
Dereitos
Attribution 4.0 International
https://creativecommons.org/licenses/by/4.0/
ISSN
2076-3417