Improving the calibration of building simulation with interpolated weather datasets
Use este enlace para citar
http://hdl.handle.net/2183/35021
A non ser que se indique outra cousa, a licenza do ítem descríbese como © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/
Coleccións
- GI-CTC - Artigos [59]
Metadatos
Mostrar o rexistro completo do ítemTítulo
Improving the calibration of building simulation with interpolated weather datasetsAutor(es)
Data
2018-02-06Cita bibliográfica
Eguía Oller, P., Alonso Rodríguez, J. M., Saavedra González, Á., Arce Fariña, E., & Granada Álvarez, E. (2018). Improving the calibration of building simulation with interpolated weather datasets. Renewable Energy, 122, 608-618. https://doi.org/10.1016/j.renene.2018.01.100
Resumo
[Abstract]: The building sector offers huge potential for energy savings, which helps to achieve environmental objectives and social benefits. A good approach to determine both the energy consumption of new buildings and the energetic refurbishment of existing buildings is through thermal simulation.
This paper studies how building energy simulation calibration can be improved using interpolated weather data to determine on-site meteorological parameters at the building location.
The lack of precise meteorological data in the exact location of buildings means that data from nearby stations is generally used, not knowing how far the error spreads in the results of heating demands and loads. The novelty of this paper lies in the analysis of error propagation to the results of demands and loads of thermal simulation, as well as in the method used to reduce these errors by TPS interpolation.
As an interesting conclusion, the average (CV(RMSE)) obtained in the simulation of the studied building, placed successively in each one of the 70 meteorological station locations, decreases from 74% when using the nearest neighborhood to each site to 26% using the TPS interpolation technique. The error in the building simulations is almost three times lower using the studied method.
Palabras chave
Building simulation
Weather data
Interpolation
Thin plate spline
Weather data
Interpolation
Thin plate spline
Descrición
Manuscrito aceptado
Versión do editor
Dereitos
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/
ISSN
1879-0682