Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial Tests
Use este enlace para citar
http://hdl.handle.net/2183/30005Colecciones
- CITEEC-CGM - Artigos [96]
Metadatos
Mostrar el registro completo del ítemTítulo
Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial TestsFecha
2022Cita bibliográfica
Orosa, P., Pérez, I., Pasandín, A. R. (2022). Evaluation of the shear and permanent deformation properties of cold in-place recycled mixtures with bitumen emulsion using triaxial tests. Construction and Building Materials, 328, 127054. DOI: 10.1016/j.conbuildmat.2022.127054
Resumen
[Abstract] The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a circular economy. Triaxial tests have proven to be suitable for studying the mechanical behaviour of cold mixtures. In this study, CIR specimens were prepared using a gyratory compactor with different proportions of bitumen emulsion. The Mohr–Coulomb diagrams and shear parameters were obtained by conducting monotonic triaxial tests at different confining pressures. The binder content provided adequate cohesion; however, an excess of binder reduced internal friction. Subsequently, repeated load permanent deformation triaxial tests were performed. Accordingly, critical stress ratios between 20% and 30% were obtained, and the mix with a 2.50% binder exhibited the best response. Lastly, two permanent deformation prediction models were fitted to the measured results. For high deformations, the Paute model underestimated the deformations, whereas the Huurman model demonstrated the best fit.
Palabras clave
Cold in-place recycling (CIR)
Bitumen stabilized material
Reclaimed asphalt pavement (RAP)
Bitumen emulsion
Gyratory compactor
Triaxial testing
Shear properties
Permanent deformation
Rutting
Prediction model
Bitumen stabilized material
Reclaimed asphalt pavement (RAP)
Bitumen emulsion
Gyratory compactor
Triaxial testing
Shear properties
Permanent deformation
Rutting
Prediction model
Descripción
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
Versión del editor
Derechos
Atribución 4.0 Internacional