Listar GI-Polímeros - Artigos por autor "Ares-Pernas, Ana"
Mostrando ítems 1-11 de 11
-
Enhancement of 3D Printability by FDM and Electrical Conductivity of PLA/MWCNT Filaments Using Lignin as Bio-Dispersant
Lage-Rivera, Silvia; Ares-Pernas, Ana; Becerra Permuy, Juan Carlos; Gosset, Anne; Abad, María-José (MDPI, 2023-02-17)[Abstract] To increase the applications of FDM (fusion deposition modeling) 3D printing in electronics, it is necessary to develop new filaments with good electrical properties and suitable processability. In this work, ... -
Experimental and Numerical Investigation of the Extrusion and Deposition Process of a Poly(lactic Acid) Strand with Fused Deposition Modeling
Gosset, Anne; Barreiro-Villaverde, David; Becerra Permuy, Juan Carlos; Lema, Marcos; Ares-Pernas, Ana; Abad, María-José (MDPI, 2020)[Abstract] In the last decade, Fused Deposition Modeling (FDM) has gained popularity for allowing the fabrication of pieces with complex shapes. The final quality of the pieces is strongly linked to the shape, size and ... -
Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors
Ares-Pernas, Ana; Arias-Ferreiro, Goretti; Lasagabáster-Latorre, Aurora; Dopico-García, M. Sonia; Pereira, N.; Costa, P.; Lanceros-Mendez, Senentxu; Abad, María José (Wiley, 2022-07)[Abstract] The development of tunable UV-curable polymeric composites for functional applications, taking into consideration environmental issues and additive manufacturing technologies, is a research topic with relevant ... -
Flexible thermoelectric energy harvesting system based on polymer composites
Ares-Pernas, Ana; Rodrigues-Mariño, T.; Correia, V.; Tubio, C.-R.; Abad, María José; Lanceros-Mendez, Senentxu; Costa, P. (Elsevier, 2023-10)[Abstract] Flexible and easy processing lightweight thermoelectric materials for energy harvesting applications have shown an increasing interest. Thermoplastic polyvinylidene fluoride (PVDF) and elastomer styrene-ethyle ... -
Last Developments in Polymers for Wearable Energy Storage Devices
Lage-Rivera, Silvia; Ares-Pernas, Ana; Abad, María-José (Wiley, 2022-06-25)[Abstract] Our modern and technological society requests enhanced energy storage devices to tackle the current necessities. In addition, wearable electronic devices are being demanding because they offer many facilities ... -
Lignin as a high-value bioaditive in 3D-DLP printable acrylic resins and polyaniline conductive composite
Arias-Ferreiro, Goretti; Lasagabáster-Latorre, Aurora; Ares-Pernas, Ana; Ligero, Pablo; García-Garabal, Sandra; Dopico, Sonia; Abad, María-José (MDPI, 2022-10-04)[Abstract]: With increasing environmental awareness, lignin will play a key role in the transition from the traditional materials industry towards sustainability and Industry 4.0, boosting the development of functional ... -
Moving to e-Service Learning in Higher Education
Dapena, Adriana; Castro-Castro, Paula-María; Ares-Pernas, Ana (MDPI, 2022)[Abstract] Service Learning is a methodology in which students achieve academic and transversal competences related to the curriculum of a subject while performing a service for the benefit of the community. With the ... -
Photocurable printed piezocapacitive pressure sensor based on an acrylic resin modified with polyaniline and lignin
Arias-Ferreiro, Goretti; Ares-Pernas, Ana; Lasagabáster-Latorre, Aurora; Dopico-García, M. Sonia; Pereira, N.; Costa, P.; Lanceros-Mendez, Senentxu; Abad, María-José; Ligero, Pablo (Wiley, 2022-08)[Abstract]: The design of suitable materials for the manufacture of pressure sensors with high sensitivity and flexibility in wearable electronics is still a challenge. In this study, a flexible and portable pressure sensor ... -
Polyethylene/ Poly(3-hydroxybutyrate-co-3-hydroxyvalerate /Carbon Nanotube Composites for Eco-Friendly Electronic Applications
Fernández Armada, David; González Rodríguez, Victoria; Costa, Pedro; Lanceros-Mendez, Senentxu; Arias-Ferreiro, Goretti; Abad, María-José; Ares-Pernas, Ana (Elsevier, 2022-08)[Abstract] The development of new conducting composites, for electric and electronic applications, with lower environmental impact is a relevant issue. Blending poly (3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) with ... -
Printability Study of a Conductive Polyaniline/Acrylic Formulation for 3D Printing
Arias-Ferreiro, Goretti; Ares-Pernas, Ana; Lasagabáster-Latorre, Aurora; Aranburu, Nora; Guerrica-Echevarria, Gonzalo; Dopico-García, M. Sonia; Abad, María-José (MDPI, 2021)[Abstract] There is need for developing novel conductive polymers for Digital Light Processing (DLP) 3D printing. In this work, photorheology, in combination with Jacobs working curves, efficaciously predict the printability ... -
Service-Learning Projects in University Degrees Based on Sustainable Development Goals: Proposals and Results
Castro-Castro, Paula-María; Ares-Pernas, Ana; Dapena, Adriana (MDPI AG, 2020-09-25)[Abstract] We present several Service-Learning projects developed considering Sustainable Development Goals to provide the students skills for the support of a sustainable society. This project begins with collecting ...