Buscar
Mostrando ítems 1-10 de 10
Hot mix asphalt using C&D waste as coarse aggregates
(Elsevier, 2012-04)
[Abstract] This article evaluates the possibility of designing hot asphalt mix road pavements using Construction and demolition waste as coarse recycled aggregates. The percentages of recycled aggregates used in the mixtures ...
Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates
(Elsevier, 2015)
[Abstract:] In this study, the nonlinear elastic behavior of bitumen-stabilized materials with emulsion (BSM-E)1 with recycled aggregates from construction and demolition (C&D)2 waste was analyzed using dynamic triaxial ...
Permanent deformation models for a granular material used in road pavements
(Elsevier, 2006)
[Abstract:] This paper analyses the permanent deformation performance of an unbound granular material that has been subjected to repeated triaxial loads. The study focuses on the evolution of the cumulative strain and ...
Rutting prediction of a granular material for base layers of low-traffic roads
(Elsevier, 2010)
[Abstract:] This paper analyses the permanent deformation performance of an unbound granular material for base layers of low-traffic roads. The material has been subjected to repeated triaxial loads. The shakedown theory ...
Feasibility of Using Recycled Concrete Aggregates for Half-Warm mix Asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and
demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt
(HWMA) instead ...
Characterization of hot-mix asphalt made with recycled concrete aggregates that have been cured for 4 hours in the oven
(Trans Tech Publications, 2014)
[Abstract:] In this research a laboratory characterization of hot-mix asphalt (HMA) made with recycled concrete aggregates (RCA) from construction and demolition waste (CDW) as base layer in road construction has been ...
Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial Tests
(Elsevier, 2022)
[Abstract] The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a circular economy. Triaxial tests have proven to be suitable for studying the mechanical behaviour of cold mixtures. In ...
Effect of ageing time on properties of hot-mix asphalt containing recycled concrete aggregates
(Elsevier, 2014-02-15)
[Abstract] This study describes a laboratory evaluation on the effect of ageing time on the primary properties of hot-mix asphalt (HMA) containing recycled concrete aggregates (RCA) from construction and demolition waste ...
Feasibility of using recycled concrete aggregates on half-warm mix asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt (HWMA) instead ...
Valorisation of Lignin-Rich Industrial Byproduct Into Half-Warm Mix Reclaimed Asphalt With Enhanced Performance
(Elsevier, 2022)
[Abstract] To promote a circular economy and sustainable development, the possibility of using a lignin-rich industrial byproduct as a partial substitute for asphalt emulsions in road pavements is analysed. A half-warm mix ...