Buscar
Mostrando ítems 1-10 de 15
Assessment of Two Laboratory Design Methods for CIR Mixtures With Bitumen Emulsion Based on Static and Gyratory Compaction
(Elsevier, 2020)
[Abstract] To expand the body of knowledge regarding cold in-place recycled mixtures, this study presents two different laboratory design methods. The main differences between the methods are the compaction procedures ...
Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial Tests
(Elsevier, 2022)
[Abstract] The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a circular economy. Triaxial tests have proven to be suitable for studying the mechanical behaviour of cold mixtures. In ...
Evaluation of Two Laboratory-Based Design Methods for CIR Mixtures
(2019)
[Abstract] In this laboratory research, two different methods for the design of cold in-place recycled (CIR) asphalt mixtures were compared. By the one hand, the current Spanish design method described in the Circular Order ...
Use of lignocellulosic liquid waste from wood hardboard manufacture as bitumen emulsion extender for cold asphalt mixtures for low traffic roads
(2022)
[Abstract:] During the wet process of manufacturing wood hardboards, a large amount of water contaminated with lignocellulosic waste is generated. With the aim of promoting the circular economy, it is interesting to find ...
Short-Term Resilient Behaviour and Its Evolution With Curing in Cold In-Place Recycled Asphalt Mixtures
(Elsevier, 2022)
[Abstract] This study evaluates the short-term resilient behaviour of cold in-place recycled (CIR) asphalt mixtures with bitumen emulsion when they are more similar to non-cohesive granular materials than to conventional ...
Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP
(Elsevier, 2022)
[Abstract:] The use of cold recycled asphalt mixtures (CRM) has been soaring during recent years. Reclaimed Asphalt Pavement (RAP) is the main component of CRM, and despite the numerous studies on CRM, the impact of different ...
Compaction and Volumetric Analysis of Cold in-Place Recycled Asphalt Mixtures Prepared Using Gyratory, Static, and Impact Procedures
(Elsevier, 2021)
[Abstract] Compaction is one of the most important factors to be considered while manufacturing laboratory samples of cold in-place recycled (CIR) mixtures.
In this study, the effect of three laboratory compaction ...
Comportamiento mecánico de mezclas bituminosas recicladas en frío con emulsión: sostenibilidad y economía circular en el sector de la pavimentación
(Asociación Española de la Carretera, 2023)
[Resumen:] Durante esta investigación, se analizó el comportamiento de mezclas bituminosas recicladas en frío con emulsión bituminosa y 100% de material fresado (RAP). Se evaluaron su compactabilidad y propiedades volumétricas ...
Evaluation of water loss and stiffness increase in cold recycled mixes during curing
(Elsevier, 2023)
[Abstract:] Implementing cold solutions is one of the primary efforts in the road sector to counteract CO2 emissions and climate change. Using cold recycled mixtures (CRM) permits the reuse of up to 100% of reclaimed asphalt ...
Numerical Simulation of the Stiffness Evolution With Curing of Pavement Sections Rehabilitated Using Cold In-Place Recycling Technology
(Elsevier, 2022)
[Abstract] Cold in-place recycling (CIR) technologies are becoming one of the main bets in the road sector to promote the reduction of greenhouse gas emissions. This technique also contributes to the circular economy, ...