Centro de Innovación Tecnolóxica en Edificación e Enxeñaría Civil: Envíos recentes
Mostrando ítems 206-210 de 395
-
Compaction and Volumetric Analysis of Cold in-Place Recycled Asphalt Mixtures Prepared Using Gyratory, Static, and Impact Procedures
(Elsevier, 2021)[Abstract] Compaction is one of the most important factors to be considered while manufacturing laboratory samples of cold in-place recycled (CIR) mixtures. In this study, the effect of three laboratory compaction ... -
Critical analysis of the sustainable consumption of bitumen in asphalt concrete mixtures made with recycled concrete aggregates from construction and demolition debris
(HARD Publishing Company, 2015)[Abstract:] The frequent construction and demolition of buildings and civil works causes excessive waste of energy and natural resources. It is generally accepted that asphalt concrete (AC) mixtures made with recycled ... -
Strength tests on asphalt mixes attacked by motor fuels. Recommendations on bath immersion times
(TRB, 2007)[Abstract:] One of the limitations of asphalt mixes as pavement materials is their poor resistance to attack from crude oil-based motor fuels. Several procedures exist for determining the resistance of asphalt materials ... -
Impact of construction and demolition waste aggregates on stripping in hot mix asphalt
(TRB, 2010)[Abstract:] This paper analyzes the effect of water on the durability of hot asphalt mixtures made with recycled aggregates from construction and demolition debris. Indirect Tensile Stress tests were carried out to evaluate ... -
Treatments applied to recycled concrete aggregates when used in hot-mix asphalt
(TRB, 2015)[Abstract:] The road construction industry is one of the major consumers of aggregate at the global level. The extraction of virgin aggregates entails several environmental, sociological and economic impacts. Therefore, ...