Buscar
Mostrando ítems 1-8 de 8
Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler
(Elsevier, 2016)
[Abstract:] Certain paper industry wastes display high recycling potential. In this investigation, the feasibility of using green liquor dregs and biomass fly ash from the paper industry as filler in hot-mix asphalt (HMA) ...
Treatments applied to recycled concrete aggregates when used in hot-mix asphalt
(TRB, 2015)
[Abstract:] The road construction industry is one of the major consumers of aggregate at the global level. The extraction of virgin aggregates entails several environmental, sociological and economic impacts. Therefore, ...
Characterization of hot-mix asphalt made with recycled concrete aggregates that have been cured for 4 hours in the oven
(Trans Tech Publications, 2014)
[Abstract:] In this research a laboratory characterization of hot-mix asphalt (HMA) made with recycled concrete aggregates (RCA) from construction and demolition waste (CDW) as base layer in road construction has been ...
The influence of the mineral filler on the adhesion between aggregates and bitumen
(Elsevier, 2015)
[Abstract:] The loss of adhesion is a major mechanism of physical distress in hot-mix asphalt (HMA) because it could reduce the durability of HMA. In this study, active and passive adhesion between the aggregates and the ...
Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion
(Elsevier, 2014-03-31)
[Abstract] The incorporation of recycled concrete aggregates (RCA) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. To date, several investigations have examined the use of this type of waste ...
Impact of construction and demolition waste aggregates on stripping in hot mix asphalt
(TRB, 2010)
[Abstract:] This paper analyzes the effect of water on the durability of hot asphalt mixtures made with recycled aggregates from construction and demolition debris. Indirect Tensile Stress tests were carried out to evaluate ...
Valorisation of Lignin-Rich Industrial Byproduct Into Half-Warm Mix Reclaimed Asphalt With Enhanced Performance
(Elsevier, 2022)
[Abstract] To promote a circular economy and sustainable development, the possibility of using a lignin-rich industrial byproduct as a partial substitute for asphalt emulsions in road pavements is analysed. A half-warm mix ...
Use of lignocellulosic liquid waste from wood hardboard manufacture as bitumen emulsion extender for cold asphalt mixtures for low traffic roads
(2022)
[Abstract:] During the wet process of manufacturing wood hardboards, a large amount of water contaminated with lignocellulosic waste is generated. With the aim of promoting the circular economy, it is interesting to find ...