Listar por tema "Recycled aggregates"
Mostrando ítems 1-6 de 6
-
Analysis of Tensile Behavior of Recycled Aggregate Concrete Using Acoustic Emission Technique
(RILEM Publications SARL, 2020)[Abstract] Recycled concrete aggregate (RCA) was processed from reinforced concrete edge beams sourced from a demolished bridge. This material replaced different ratios of coarse aggregate in a benchmark concrete. The ... -
Binder–aggregate adhesion and resistance to permanent deformation of bitumen-emulsion-stabilized materials made with construction and demolition waste aggregates
(Elsevier, 2016)[Abstract:] Bitumen-stabilized materials with emulsion (BSM-E) are gaining increasing importance within the scope of road pavement engineering and the fight against climate change. Both environmental and economic aspects ... -
Hot mix asphalt using C&D waste as coarse aggregates
(Elsevier, 2012-04)[Abstract] This article evaluates the possibility of designing hot asphalt mix road pavements using Construction and demolition waste as coarse recycled aggregates. The percentages of recycled aggregates used in the mixtures ... -
Impact of construction and demolition waste aggregates on stripping in hot mix asphalt
(TRB, 2010)[Abstract:] This paper analyzes the effect of water on the durability of hot asphalt mixtures made with recycled aggregates from construction and demolition debris. Indirect Tensile Stress tests were carried out to evaluate ... -
Posibilidades de uso del filler de recuperación y árido reciclado en grouts de relleno de bloques de hormigón
(2019)[Resumen] Según la Asociación Española de Fabricantes de Mezclas Asfálticas (ASEFMA), en 2018 se produjeron en España 16,1 millones de toneladas de mezclas asfálticas en caliente, lo que corresponde a una generación de ... -
Recycled construction and demolition waste in Cold Asphalt Mixtures : evolutionary properties
(Elsevier, 2016)[Abstract:] The use of Cold Asphalt Mixtures (CAM) usually results in financial and environmental saving, while decreasing pollution and occupational hazards. However, they require a length of curing time to reach their ...