Buscar
Mostrando ítems 1-10 de 22
Assessment of Two Laboratory Design Methods for CIR Mixtures With Bitumen Emulsion Based on Static and Gyratory Compaction
(Elsevier, 2020)
[Abstract] To expand the body of knowledge regarding cold in-place recycled mixtures, this study presents two different laboratory design methods. The main differences between the methods are the compaction procedures ...
Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial Tests
(Elsevier, 2022)
[Abstract] The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a circular economy. Triaxial tests have proven to be suitable for studying the mechanical behaviour of cold mixtures. In ...
Feasibility of Using a Lignin-Containing Waste in Asphalt Binders
(Springer, 2020)
[Abstract:] A lot of water waste streams are produced during the production of hardboard panels. This paper analyses the feasibility of using a lignin-containing waste from the hardboard industry in asphalt binders. It ...
Performance of Bituminous Mixtures Involving Construction and Demolition Waste
(Taylor & Francis Online, 2020)
[Abstract:] The incorporation of recycled concrete aggregates (RCA) from construction and demolition waste (CDW) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. This paper describes a laboratory ...
Evaluation of the Resilient Modulus of Hot-Mix Asphalt Made With Recycled Concrete Aggregates From Construction and Demolition Waste
(MDPI, 2020)
[Abstract] This paper reports the influence of the percentage of recycled aggregate (RCA) from construction and demolition waste (C&DW) together with the percentage of binder (L), curing time (t) and temperature (T) of the ...
Performance of high rap half-warm mix asphalt
(MDPI, 2020)
[Abstract:] The current global situation regarding climate change makes it necessary to promote the circular economy and the use of more environmentally friendly technologies in the construction sector. To that end, it is ...
Adhesion Analysis of Waste Cork Dust as Filler for Bituminous Mixtures
(Taylor & Francis, 2020)
[Abstract] Suberin is a biopolymer that can be found in high amounts in natural cork. As is well known, polymers can be used as bitumen modifiers to improve the properties of bituminous mixtures. This paper describes ...
Enhancement of curing properties of cold in-place recycling asphalt mixtures by induction heating
(Taylor & Francis Online, 2021)
[Abstract:] In this study, samples of cold in-place recycling mix (CIR) with steel fibres were manufactured and heated by electromagnetic induction. Heating was conducted to accelerate the curing process and make the CIR ...
Short-Term Resilient Behaviour and Its Evolution With Curing in Cold In-Place Recycled Asphalt Mixtures
(Elsevier, 2022)
[Abstract] This study evaluates the short-term resilient behaviour of cold in-place recycled (CIR) asphalt mixtures with bitumen emulsion when they are more similar to non-cohesive granular materials than to conventional ...
Evaluation of water loss and stiffness increase in cold recycled mixes during curing
(Elsevier, 2023)
[Abstract:] Implementing cold solutions is one of the primary efforts in the road sector to counteract CO2 emissions and climate change. Using cold recycled mixtures (CRM) permits the reuse of up to 100% of reclaimed asphalt ...