Buscar
Mostrando ítems 1-10 de 22
Moisture damage resistance of bituminous mixtures manufactured with waste biomass fly ashes form the paper industry as filler
(2019)
[Abstract:] Biomass fly ashes (bioashes) are solid byproducts generated during the combustion of biomass. One of the main drawbacks of using biomass combustion as an energy source is the environmental management of the ...
Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures
(Elsevier, 2014)
[Abstract:] Cold asphalt mixtures (CAM) with 100% recycled aggregates from construction and demolition waste (CDW) were researched to ecologically and economically improve cold asphalt mixtures. The present study indicates ...
Reciclaje de residuos de construcción y demolición como áridos de mezclas bituminosas en frío
(Asociación Española de la Carretera, 2015)
[Resumen:] Los Residuos de Construcción y Demolición (RCD) han sido investigados como áridos en materiales de ingeniería civil, tales como hormigón o mezclas bituminosas en caliente. En la presente investigación, se estudia ...
Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates
(Elsevier, 2015)
[Abstract:] In this study, the nonlinear elastic behavior of bitumen-stabilized materials with emulsion (BSM-E)1 with recycled aggregates from construction and demolition (C&D)2 waste was analyzed using dynamic triaxial ...
Recycled construction and demolition waste in Cold Asphalt Mixtures : evolutionary properties
(Elsevier, 2016)
[Abstract:] The use of Cold Asphalt Mixtures (CAM) usually results in financial and environmental saving, while decreasing pollution and occupational hazards. However, they require a length of curing time to reach their ...
Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste
(Elsevier, 2015)
[Abstract:] The stiffness of cold asphalt mixtures (CAM) with 100% recycled construction and demolition waste aggregates (CDWA) was studied from three different points of view: the indirect tensile stiffness modulus (ITSM), ...
Feasibility of Using Recycled Concrete Aggregates for Half-Warm mix Asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and
demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt
(HWMA) instead ...
Treatments applied to recycled concrete aggregates when used in hot-mix asphalt
(TRB, 2015)
[Abstract:] The road construction industry is one of the major consumers of aggregate at the global level. The extraction of virgin aggregates entails several environmental, sociological and economic impacts. Therefore, ...
A proposed methodology for the global study of the mechanical properties of cold asphalt mixtures
(Elsevier, 2014)
[Abstract:] Despite having been used for decades, the structural performance of emulsion-treated materials has still not been investigated as intensely as in the case of hot-mix asphalt (HMA). Proof of this is the lack of ...
Binder–aggregate adhesion and resistance to permanent deformation of bitumen-emulsion-stabilized materials made with construction and demolition waste aggregates
(Elsevier, 2016)
[Abstract:] Bitumen-stabilized materials with emulsion (BSM-E) are gaining increasing importance within the scope of road pavement engineering and the fight against climate change. Both environmental and economic aspects ...