Listar Mecánica de Estruturas (ME) por título
Mostrando ítems 21-38 de 38
-
Experimental investigation on wind energy harvesting by aeroelastic excitation of a semi-circular cylinder with flat side parallel to the incoming flow
(WIT Press, 2021)[Abstract:] In this work, the performance of a semicircular cylinder with the flat side parallel to the incoming flow has been studied experimentally in a wind-excited energy harvester. Preliminary sectional model wind ... -
Fail-safe optimum cable system under cable breakage in cable-stayed bridges. Application to the Queensferry Crossing Bridge
(Elsevier, 2023)[Abstract:] This paper presents a methodology to optimize the cable system in cable-stayed bridges, whose main novelty is to take into account the accidental breakage of one cable within the design process. To this end, a ... -
Inclusion of Mechanical Dampers in the Multimodal Flutter Analysis of Slender Structures
(WIT Press, 2020)[Abstract] Sometimes slender structures are reinforced with mechanical dampers to reduce the vibrations caused by aeroelastic phenomena like flutter. However the formulation of flutter analysis only considers the classical ... -
Multi-bubble scheme and structural analysis of a hypersonic stratospheric flight vehicle
(Elsevier, 2022)[Abstract:] The STRATOFLY MR3 vehicle is the main objective of the STRATOFLY project, which aims to develop a hypersonic air breathing concept capable of covering antipodal routes in less than three hours. The aircraft ... -
Numerical simulations of the aerodynamic response of 2D circular segments by means of URANS
(WIT Press, 2016)[Abstract:] In the wind engineering field, the so-called D-section (semi-circular cylinder) has attracted some attention from researchers, since it is a galloping prone geometry. In fact, a modest number of references where ... -
Numerical simulations of the aerodynamic response of circular segments with different corner angles by means of 2D URANS. Impact of turbulence modeling approaches
(Taylor & Francis, 2018)[Abstract:] This paper presents the results of numerical and experimental investigations on the force coefficients and Strouhal numbers of circular segments considering different corner angles or chord to sagitta ratios. ... -
Optimisation of Thin-Walled Hybrid Vertical Struts for Crashworthy Aircraft Designs
(Springer, 2020)[Abstract] This research concerns the crashworthiness enhancement of a model of a Boeing 737-200 fuselage section. Using a validated numerical specimen, four thin-walled crushable hybrid energy absorbers are added to the ... -
Optimum design of cable-stayed bridges considering cable failure
(WIT Press, 2022)[Abstract:] A methodology to obtain the minimum weight of cables in cable-stayed bridges when a cable fails has been developed. To this end, a multi-model strategy is proposed that takes into account design constraints in ... -
Reliability index based strategy for the probability-damage approach in fail-safe design optimization (β-PDFSO)
(Springer Nature, 2023)[Abstract:] This research proposes a new formulation for fail-safe size optimization, considering the probability of occurrence of each failure scenario and the random structural parameters as sources of uncertainty. ... -
Semi-automated setup of CFD simulations of rectangular cylinders and streamlined box decks
(WIT Press, 2020)[Abstract:] A piece of software that acts as a Graphical User Interface (GUI) for the setup of computational fluid dynamics (CFD) models that are solved by means of the open source code OpenFOAM, is presented. The software ... -
Shape optimization of tall buildings cross-section: Balancing profit and aeroelastic performance
(Wiley, 2022)[Abstract:] Shape optimization is an effective tool to improve the aerodynamic performance of tall buildings by introducing minor modifications to the original project. Nevertheless, economic criteria demand efficient cross ... -
Size and shape optimization of aluminum tubes with GFRP honeycomb reinforcements for crashworthy aircraft structures
(Elsevier, 2015)[Abstract:] Crashworthiness optimization of aircraft and automotive structures has become one the main research targets for their respective leading industries. The following research proposes a new design of an aircraft’s ... -
Square Cylinder Under Different Turbulent Intensity Conditions by Means of Small-Scale Turbulence
(WIT Press, 2021)[Abstract] The phenomenon of turbulence is present in almost every type of flow in practical applications. Depending on its level of intensity and length scale, it can modify both the aerodynamic and aeroelastic performance ... -
Study of a static and vertically free-to-oscillate 4:1 rectangular cylinder by means of 2D URANS simulations
(WIT Press, 2018)[Abstract:] Flexible structures, such as cable-supported bridges, are prone to suffer from vortex-induced vibrations (VIV) under wind flow, as their span lengths are steadily growing in the last decades. VIV is a phenomenon ... -
Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading
(Elsevier, 2020)[Abstract:] An experimental and numerical study on the quasi-static loading of AlSi10Mg square boxes produced by selective laser melting (SLM) was carried out. The goal was to evaluate the applicability of common finite ... -
Verification Approaches for the 3D Static LES Simulations of the Stonecutters Bridge Deck
(WIT Press, 2021)[Abstract] In computational fluid dynamics (CFD) simulations, verification is the process of identifying both the spatial and the temporal discretisations providing relatively insensitive model results. The underlying goal ... -
Wave Celerity in Hydraulic Transients Computation for CIPP-Rehabilitated Pipes
(WIT Press, 2020)[Abstract] Most of the water pipe infrastructure is outdated; therefore, frequent maintenance and repair works are required. To speed up the rehabilitation work and to have a more sustainable and efficient approach, ... -
Wind tunnel study on the effect of the gap width in the aerodynamic and aeroelastic responses of twin-box decks
(WIT Press, 2018)[Abstract:] Twin-box decks have recently been introduced in long-span bridges because this type of slotted cross-section provides flutter critical wind speeds higher than mono-box streamlined decks for flexible structures. ...