Rodríguez-Dopico, Francisco J.Álvarez García, AnaTarrío-Saavedra, Javier2024-12-182024-12-182024-12-02Rodríguez-Dopico, F.J.; Álvarez García, A.; Tarrío-Saavedra, J. Characterization of Epoxy Adhesive for Marine Applications. Oceans 2024, 5, 906-922. https://doi.org/10.3390/oceans50400522673-1924http://hdl.handle.net/2183/40539[Abstract] The shipping industry faces the challenge of expanding its capabilities and mitigating its environmental impact. The utilization of adhesive bonding techniques has the potential to facilitate the construction of lighter ships with a reduced carbon footprint. In this work, a complete methodology has been established to study the properties of an adhesive bond between naval steel and the behavior of the bulk adhesive when introduced into seawater. Thermogravimetric analysis (TGA) has been used to determine the thermal properties. Single-lap-joint and tensile tests have been performed showing the negative influence of temperature on the mechanical properties. Seawater absorption has been studied by gravimetric tests. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and mechanical bulk tests have been carried out before and after aging. The water absorption is Fickian, and when a constant load is applied, the absorption occurs faster and in greater quantity, decreasing the stiffness and strength. An increase in the glass transition temperature was observed in the absence of a load, with no discernible change upon the application of load condition. Also, aged specimens with constant load exhibited a reduction in water content. These phenomena may be attributed to several diffusion processes.engAttribution 4.0 International https://creativecommons.org/licenses/by/4.0/http://creativecommons.org/licenses/by/3.0/es/AdhesiveDiffusionAgingSeawaterMarineMechanical testsjournal articleopen accesshttps://doi.org/10.3390/oceans5040052