Costas, MiguelMorin, DavidLucio, Mario deLangseth, Magnus2020-03-022020-03-022020Miguel Costas, David Morin, Mario de Lucio, Magnus Langseth. Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading, European Journal of Mechanics - A/Solids, Volume 81, 2020, 103966. https://doi.org/10.1016/j.euromechsol.2020.103966http://hdl.handle.net/2183/25078[Abstract:] An experimental and numerical study on the quasi-static loading of AlSi10Mg square boxes produced by selective laser melting (SLM) was carried out. The goal was to evaluate the applicability of common finite element modelling techniques to 3D-printed parts at material and component scales, under large deformations and fracture. Uniaxial tensile specimens were extracted and tested at different orientations, and a hypo-elastic–plastic model with Voce hardening and Cockcroft–Latham’s fracture criterion was calibrated against the experimental results. The boxes were crushed laterally until failure using a spherical actuator. The considered material and finite element models were proved well suited for the prediction of the structural response of the additively manufactured components in the studied scenario.engAtribución 3.0 Españahttp://creativecommons.org/licenses/by/3.0/es/Additive manufacturingAlSi10Mg3D-printed aluminiumLateral crushingFinite elementsjournal articleopen access10.1016/j.euromechsol.2020.103966