Formaldehyde biodegradation in the presence of methanol under denitrifying conditions

Abstract

Simultaneous formaldehyde and methanol biodegradation and also denitrification were studied in batch assays and in a continuous laboratory-scale reactor. In batch assays, high formaldehyde concentrations (up to 1360 mg dm−3) were removed under anoxic conditions in the presence of methanol. It was found that formaldehyde biodegradation produced methanol and formic acid as products. The denitrification process was affected by the initial formaldehyde concentration. In the continuous reactor, the biodegradation of different concentrations of formaldehyde (1500–275 mg dm−3) and methanol (153–871 mg dm−3) took place, maintaining the organic loading rate at 0.84 g COD dm−3 d−1 (COD/N 4). However, each increase in the methanol concentration in the influent caused a decrease in the denitrification level. An adaptation period to methanol was necessary before the denitrification percentage could be recovered. In contrast with batch assays, in the continuous reactor methanol and formic acid were not detected in the effluent. Moreover, in the continuous reactor the denitrification percentages were higher and the nitrite accumulation was lower.