Study of the suitability of various types of casting materials for the manufacture of a ship engine
Use este enlace para citar
http://hdl.handle.net/2183/39324Coleccións
- Investigación (ETSECCP) [826]
Metadatos
Mostrar o rexistro completo do ítemTítulo
Study of the suitability of various types of casting materials for the manufacture of a ship engineData
2021Cita bibliográfica
Galán, J. J., Varela-Fernández, N., Graña-López, M. Á., Filgueira-Vizoso, A., García-Diez, A. (2021). Study of the suitability of various types of casting materials for the manufacture of a ship engine. Materiali in Tehnologije, 55(5), 649-654. https://doi.org/10.17222/MIT.2020.247
Resumo
[Abstract:] The objective of this work was to study the suitability of three types of cast iron for the manufacture of a ship engine: EN-GJS-500-7U for the manufacture of the engine block, EN-GJS-400-15U for the cylinder head and EN-GJL-200 for the liner. Tensile tests were carried out to obtain the ultimate tensile strength (UTS) of each material. The results for the UTS were: 460 MPa for EN-GJS-500-7U, 390 MPa for EN-GJS-400-15U and 170 MPa for EN-GJL-200. Likewise, Brinell-hardness measurements were carried out and the elements present in the materials were determined with spectrometry. Finally, the size of graphite particles in each sample was determined.
Palabras chave
Spheroidal cast iron
Grey cast iron
Mechanical properties
Engine boat
Grey cast iron
Mechanical properties
Engine boat
