Metamodelling of stiffness matrices for 2D welded asymmetric steel joints
Ver/ abrir
Use este enlace para citar
http://hdl.handle.net/2183/35483
A non ser que se indique outra cousa, a licenza do ítem descríbese como CC BY-NC-ND 4.0 https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
Coleccións
Metadatos
Mostrar o rexistro completo do ítemTítulo
Metamodelling of stiffness matrices for 2D welded asymmetric steel jointsData
2019-08-02Cita bibliográfica
A. Loureiro, M. Lopez, J.M. Reinosa, R. Gutierrez, E. Bayo, Metamodelling of stiffness matrices for 2D welded asymmetric steel joints, Journal of Constructional Steel Research 162 (2019) 105703. https://doi.org/10.1016/j.jcsr.2019.105703.
Resumo
[Abstract]: Beam-column steel joints usually have a semi-rigid behaviour, and this must be taken into account when carrying out a global analysis of the structure. Rotational springs at each side of the joint are commonly used to simulate this behaviour by means of the component method, but asymmetric welded beam-column steel joints are not included in the formulations of Eurocode 3. This research work proposes a new methodology to obtain the stiffness of welded asymmetrical beam-column steel joints, by means of a cruciform element of 4 nodes and 12 DOF, whose stiffness matrix is directly obtained by means of the meta-modelling of its elements using Kriging's method. The authors have carried out a wide study of 754 different asymmetric welded beam-column steel joints, whose finite element models have been analysed, and then the static condensation method has been used to obtain the equivalent condensed stiffness matrix (Kcond) of the cruciform element for the joints belonging to the training set. These matrices have been used to build the Kriging's model, and the rest of joints have been used for testing the method, which yields very good results. The use of meta-modelling methods to obtain the stiffness matrix of the joint is not only easier in its application than the component method, but it also leads to a formulation that is more accurate, and also takes into account the interactions between the different parts of the joint.
Palabras chave
Steel Joints
Descrición
Manuscrito aceptado
Versión do editor
Dereitos
CC BY-NC-ND 4.0 https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
ISSN
1873-5983