A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam‐to‐beam steel joints
Use este enlace para citar
http://hdl.handle.net/2183/35471
A non ser que se indique outra cousa, a licenza do ítem descríbese como Attribution-NonCommercial-NoDerivs 4.0 International https://creativecommons.org/licenses/by-nc-nd/4.0/
Coleccións
Metadatos
Mostrar o rexistro completo do ítemTítulo
A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam‐to‐beam steel jointsData
2021-02Cita bibliográfica
Lopez M, Loureiro A, Gutierrez R, Reinosa JM. A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam-to-beam steel joints. Engineering Structures 2021;228:111476. https://doi.org/10.1016/j.engstruct.2020.111476.
Resumo
[Abstract] This paper focuses on the stiffness and resistance of the additional plate in bending. This is a component which appears in beam-to-beam bolted steel joints, when a secondary beam with a flush end plate is attached orthogonally to the primary beam by an additional plate welded between its flanges. In this work, six experimental tests have been carried out to calibrate a finite element model which has been used to develop a wide parametric study. Thus, a new formulation for stiffness and resistance based on an equivalent frame is proposed.
Palabras chave
Steel Joints
Experimental
Component method
Finite element
Beam-to-beam joint
Equivalent frame
Experimental
Component method
Finite element
Beam-to-beam joint
Equivalent frame
Versión do editor
Dereitos
Attribution-NonCommercial-NoDerivs 4.0 International https://creativecommons.org/licenses/by-nc-nd/4.0/
ISSN
1873-7323