A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam‐to‐beam steel joints
Use este enlace para citar
http://hdl.handle.net/2183/35471
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivs 4.0 International https://creativecommons.org/licenses/by-nc-nd/4.0/
Colecciones
Metadatos
Mostrar el registro completo del ítemTítulo
A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam‐to‐beam steel jointsFecha
2021-02Cita bibliográfica
Lopez M, Loureiro A, Gutierrez R, Reinosa JM. A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam-to-beam steel joints. Engineering Structures 2021;228:111476. https://doi.org/10.1016/j.engstruct.2020.111476.
Resumen
[Abstract] This paper focuses on the stiffness and resistance of the additional plate in bending. This is a component which appears in beam-to-beam bolted steel joints, when a secondary beam with a flush end plate is attached orthogonally to the primary beam by an additional plate welded between its flanges. In this work, six experimental tests have been carried out to calibrate a finite element model which has been used to develop a wide parametric study. Thus, a new formulation for stiffness and resistance based on an equivalent frame is proposed.
Palabras clave
Steel Joints
Experimental
Component method
Finite element
Beam-to-beam joint
Equivalent frame
Experimental
Component method
Finite element
Beam-to-beam joint
Equivalent frame
Versión del editor
Derechos
Attribution-NonCommercial-NoDerivs 4.0 International https://creativecommons.org/licenses/by-nc-nd/4.0/
ISSN
1873-7323