Performance of hot-mix asphalt involving recycled concrete aggregates
Use este enlace para citar
http://hdl.handle.net/2183/31954Coleccións
- CITEEC-CGM - Artigos [96]
Metadatos
Mostrar o rexistro completo do ítemTítulo
Performance of hot-mix asphalt involving recycled concrete aggregatesData
2020Cita bibliográfica
A. R. Pasandín, I. Pérez (2020). Performance of hot-mix asphalt involving recycled concrete aggregates. International Journal of Pavement Engineering, 21:9, 1044-1056, DOI: 10.1080/10298436.2018.1518525
Resumo
[Abstract:] The incorporation of recycled concrete aggregates (RCA) from construction and demolition waste (CDW) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. This paper describes a laboratory study on the use of RCA in HMA for base courses in road pavements. HMA involving RCA in percentages of 0%, 5%, 10%, 20% and 30% were evaluated. To improve the moisture damage resistance of HMA made with RCA, the mixtures were cured in the oven for 4 h at a mixing temperature of 170°C, before compaction. The results indicated that the mixes made with RCA and cured for 4 h in the oven loosely fulfil the Spanish moisture damage specifications. The results also indicated that the Marshall Stability and the moisture damage resistance are substantially improved by curing the mixture in the oven. The mixtures also exhibited an adequate resistance to permanent deformation. The results from this study were highly encouraging, although HMA with RCA requires further investigation.
Palabras chave
Recycled concrete aggregates
Construction and demolition waste
Hot-mix asphalt
Curing time
Moisture damage resistance
Absorbed bitumen content
Effective binder
Construction and demolition waste
Hot-mix asphalt
Curing time
Moisture damage resistance
Absorbed bitumen content
Effective binder
Descrición
Versión orixinal do artigo publicado por Taylor & Francis en 2020 na International Journal of Pavement Engineering, dispoñible en: https://doi.org/10.1080/10298436.2018.1518525