Thermal Parameter and State Estimation for Digital Twins of E-Powertrain Components
![Thumbnail](/dspace/bitstream/handle/2183/28613/Thermal_Parameter.pdf.jpg?sequence=5&isAllowed=y)
Ver/ abrir
Use este enlace para citar
http://hdl.handle.net/2183/28613
A non ser que se indique outra cousa, a licenza do ítem descríbese como Atribución 4.0 Internacional (CC BY 4.0)
Coleccións
- LIM - Artigos [51]
Metadatos
Mostrar o rexistro completo do ítemTítulo
Thermal Parameter and State Estimation for Digital Twins of E-Powertrain ComponentsAutor(es)
Data
2021-07Cita bibliográfica
B. Rodríguez, E. Sanjurjo, M. Tranchero, C. Romano and F. González, "Thermal Parameter and State Estimation for Digital Twins of E-Powertrain Components," in IEEE Access, vol. 9, pp. 97384-97400, 2021, doi: 10.1109/ACCESS.2021.3094312
Resumo
[Abstract] The performance of powertrain components in electric vehicles is tightly intertwined with their thermal behavior. In practical applications, their temperature must be monitored and kept below certain thresholds to avoid performance drops and failure. Sensors, however, cannot always be placed at critical locations. Instead, it is possible to use numerical models to estimate relevant magnitudes during system operation. Thermal effects in electric and electronic components can be represented in a compact way using lumped-parameter equivalent circuits. These can be combined with sensor readings from the device under
study to develop digital twins and use them to monitor temperatures during test and operation. In this paper, we put forward a method to generate thermal digital twins of e-powertrain elements such as power inverters.
The thermal equivalent circuit equations are obtained from a general-purpose simulation software tool and optimized to enable real-time execution. Kalman filters are then used to fuse the simulation results from this model and sensor measurements of component temperatures. The proposed method provides a way to estimate the inputs and parameters of the thermal circuit and can be used to avoid the drift of the simulation away from actual component behavior. The performance of this approach is demonstrated with a simple
benchmark example and the thermal equivalent circuit of a three-phase inverter.
Palabras chave
Temperature measurement
Temperature sensors
Kalman filters
Inverters
Sensors
Numerical models
Digital twin
Temperature sensors
Kalman filters
Inverters
Sensors
Numerical models
Digital twin
Versión do editor
Dereitos
Atribución 4.0 Internacional (CC BY 4.0)