Mostrar o rexistro simple do ítem

dc.contributor.authorMontero, Javier
dc.contributor.authorFilgueira-Vizoso, Almudena
dc.contributor.authorGarcía-Diez, Ana
dc.contributor.authorMier, Jose
dc.contributor.authorCamba, C.
dc.date.accessioned2020-02-24T16:39:18Z
dc.date.available2020-02-24T16:39:18Z
dc.date.issued2019
dc.identifier.issn1996-1944,
dc.identifier.urihttp://hdl.handle.net/2183/25015
dc.description.abstract[Abstract] This study shows the efects of wear on welded joints of ASTM A355 Gr. P11 “Seamless Ferritic Alloy-Steel Pipe for High Temperature Service” steels subjected to the welding procedures established by codes B31.1 and ASME III. The standard welding procedure establishes the following steps: a preheating process, welding and post-weld heat treatment. This generates a wear behavior that depends on the thermal cycles to which the diferent areas of the joint are subjected. The objective of this article was the study of the behavior against the flow-accelerated corrosion of the welded joints of a low alloy steel. There is the possibility of establishing welding procedures other than those established, while maintaining the safety ranges, depending on the field of application for the steel.es_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.relation.urihttps://doi.org/10.3390/ma12213630es_ES
dc.rightsAtribución 3.0 Españaes_ES
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/es/*
dc.subjectMateriales - Deterioroes_ES
dc.subjectCorrosiónes_ES
dc.subjectMetales - Soldaduraes_ES
dc.subjectSoldaduraes_ES
dc.subjectSoldadurases_ES
dc.titleThe Wear Responses of the Welded Joints of ASTM A335 Gr. P11 Steels Affected by Accelerated Flow Corrosiones_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.rights.accessinfo:eu-repo/semantics/openAccesses_ES
UDC.journalTitleMaterialses_ES
UDC.volume12es_ES
UDC.issue21es_ES


Ficheiros no ítem

Thumbnail
Thumbnail

Este ítem aparece na(s) seguinte(s) colección(s)

Mostrar o rexistro simple do ítem