A first approach to a proposal of a soft robotic link acting as a neck
Use este enlace para citar
http://hdl.handle.net/2183/24937
Excepto si se señala otra cosa, la licencia del ítem se describe como http://creativecommons.org/licenses/by-nc/3.0/es/
Colecciones
Metadatos
Mostrar el registro completo del ítemTítulo
A first approach to a proposal of a soft robotic link acting as a neckFecha
2018Cita bibliográfica
Nagua, L., Muñoz, J., Monje, C.A., Balaguer, C. A first approach to a proposal of a soft robotic link acting as a neck. En Actas de las XXXIX Jornadas de Automática, Badajoz, 5-7 de Septiembre de 2018 (pp.522-529). DOI capítulo: https://doi.org/10.17979/spudc.9788497497565.0522 DOI libro: https://doi.org/10.17979/spudc.9788497497565
Versiones
http://hdl.handle.net/10662/8411
Resumen
[Abstract] The purpose of this paper is to design a soft robotic neck prototype with two Degrees of Freedom (DOF) and propose a control system based on a fractional order PD controller (FPD). The neck will be able to perform movements of flexion, extension and lateral bending. To achieve these movements, the design is made based on a cable-driven mechanism, with components easy to manufacture in a 3D printer. Simulations are performed to validate the feasibility of the developed parallel robot prototype and the robustness of the proposed control scheme to mass changes at the tip.
Palabras clave
Soft robotics neck
Cable-driven parallel
Mechanisms (CDPM)
Fractional order control
Robust control
Neck prototype
Cable-driven parallel
Mechanisms (CDPM)
Fractional order control
Robust control
Neck prototype
Versión del editor
ISBN
978-84-09-04460-3 (UEX) 978-84-9749-756-5 (UDC electrónico)
