Hot mix asphalt using C&D waste as coarse aggregates
Use this link to cite
http://hdl.handle.net/2183/16607Collections
- CITEEC-CGM - Artigos [93]
Metadata
Show full item recordTitle
Hot mix asphalt using C&D waste as coarse aggregatesDate
2012-04Citation
PÉREZ, I.; PASANDÍN, A. R.and MEDINA, L. Hot Mix Asphalt using C&D Waste as Coarse Aggregates. Materials & Design, 4, 2012, vol. 36, pp. 840-846. ISSN 0261-3069.
Abstract
[Abstract] This article evaluates the possibility of designing hot asphalt mix road pavements using Construction and demolition waste as coarse recycled aggregates. The percentages of recycled aggregates used in the mixtures were: 0%, 20%, 40% and 60%. Cement and lime were used as fillers. The mixtures made with coarse recycled aggregates complied with the Marshall technical specifications for low volume roads. The mixtures also showed good resistance to permanent deformation evaluated by means of wheel tracking tests. Nevertheless, the mixtures made with RA may have insufficient durability due to their high susceptibility to water action which was evaluated using stripping tests.
Keywords
Reutilization
Mechanical
Adhesion
Building-materials
Demolition debris
Recycled concrete
Construction
Hot mix asphalt
Asphalt mix
Coarse aggregates
Construction and demolition waste
E. Mechanical
Hot mix asphalt
Low volume road
Permanent deformation
Re-utilization
Recycled aggregates
Road pavements
Technical specifications
Wheel tracking
Asphalt pavements
Mixture
Rating
Recycling
Mechanical
Adhesion
Building-materials
Demolition debris
Recycled concrete
Construction
Hot mix asphalt
Asphalt mix
Coarse aggregates
Construction and demolition waste
E. Mechanical
Hot mix asphalt
Low volume road
Permanent deformation
Re-utilization
Recycled aggregates
Road pavements
Technical specifications
Wheel tracking
Asphalt pavements
Mixture
Rating
Recycling
Editor version
Rights
Copyright © 2011 Elsevier Ltd. All rights reserved.
ISSN
0261-3069
Related items
Showing items related by title, author, creator and subject.
-
Review of warm mix asphalt new technologies
Martínez-Díaz, Margarita; Pérez Pérez, Ignacio; Romera, Luis (Dyna, 2013)[Abstract] Since the signature of the Kyoto Protocol, efforts in the search of processes to slow climate change down have been increased. In the case of the manufacture of bituminous mixtures, new products and procedures ... -
Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste
Gómez Meijide, Breixo; Pérez Pérez, Ignacio; Airey, Gordon; Thom, Nicholas (Elsevier, 2015)[Abstract:] The stiffness of cold asphalt mixtures (CAM) with 100% recycled construction and demolition waste aggregates (CDWA) was studied from three different points of view: the indirect tensile stiffness modulus (ITSM), ... -
Assessment of Two Laboratory Design Methods for CIR Mixtures With Bitumen Emulsion Based on Static and Gyratory Compaction
Orosa, Pablo; Pasandín, A.R.; Pérez Pérez, Ignacio (Elsevier, 2020)[Abstract] To expand the body of knowledge regarding cold in-place recycled mixtures, this study presents two different laboratory design methods. The main differences between the methods are the compaction procedures ...