Buscar
Mostrando ítems 1-5 de 5
Assessment of Two Laboratory Design Methods for CIR Mixtures With Bitumen Emulsion Based on Static and Gyratory Compaction
(Elsevier, 2020)
[Abstract] To expand the body of knowledge regarding cold in-place recycled mixtures, this study presents two different laboratory design methods. The main differences between the methods are the compaction procedures ...
Evaluation of the Shear and Permanent Deformation Properties of Cold In-Place Recycled Mixtures With Bitumen Emulsion Using Triaxial Tests
(Elsevier, 2022)
[Abstract] The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a circular economy. Triaxial tests have proven to be suitable for studying the mechanical behaviour of cold mixtures. In ...
Short-Term Resilient Behaviour and Its Evolution With Curing in Cold In-Place Recycled Asphalt Mixtures
(Elsevier, 2022)
[Abstract] This study evaluates the short-term resilient behaviour of cold in-place recycled (CIR) asphalt mixtures with bitumen emulsion when they are more similar to non-cohesive granular materials than to conventional ...
Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP
(Elsevier, 2022)
[Abstract:] The use of cold recycled asphalt mixtures (CRM) has been soaring during recent years. Reclaimed Asphalt Pavement (RAP) is the main component of CRM, and despite the numerous studies on CRM, the impact of different ...
Compaction and Volumetric Analysis of Cold in-Place Recycled Asphalt Mixtures Prepared Using Gyratory, Static, and Impact Procedures
(Elsevier, 2021)
[Abstract] Compaction is one of the most important factors to be considered while manufacturing laboratory samples of cold in-place recycled (CIR) mixtures.
In this study, the effect of three laboratory compaction ...