Buscar
Mostrando ítems 1-8 de 8
Recycled construction and demolition waste in Cold Asphalt Mixtures : evolutionary properties
(Elsevier, 2016)
[Abstract:] The use of Cold Asphalt Mixtures (CAM) usually results in financial and environmental saving, while decreasing pollution and occupational hazards. However, they require a length of curing time to reach their ...
Feasibility of Using Recycled Concrete Aggregates for Half-Warm mix Asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and
demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt
(HWMA) instead ...
Characterization of hot-mix asphalt made with recycled concrete aggregates that have been cured for 4 hours in the oven
(Trans Tech Publications, 2014)
[Abstract:] In this research a laboratory characterization of hot-mix asphalt (HMA) made with recycled concrete aggregates (RCA) from construction and demolition waste (CDW) as base layer in road construction has been ...
Effect of hydrated lime on the bond between asphalt and recycled concrete aggregates
(Taylor & Francis, 2015)
[Abstract:] In this investigation, rolling bottle tests and boiling water tests were performed to evaluate the effect of hydrated lime on the adhesion between recycled concrete aggregates (RCA) and the asphalt binder. RCA ...
Feasibility of using recycled concrete aggregates on half-warm mix asphalt
(Springer, 2018)
[Abstract:] The present study describes a laboratory investigation on the feasibility of reusing construction and demolition waste as recycled concrete aggregate (RCA) to manufacture half-warm mix asphalt (HWMA) instead ...
Performance of high rap half-warm mix asphalt
(MDPI, 2020)
[Abstract:] The current global situation regarding climate change makes it necessary to promote the circular economy and the use of more environmentally friendly technologies in the construction sector. To that end, it is ...
Enhancement of curing properties of cold in-place recycling asphalt mixtures by induction heating
(Taylor & Francis Online, 2021)
[Abstract:] In this study, samples of cold in-place recycling mix (CIR) with steel fibres were manufactured and heated by electromagnetic induction. Heating was conducted to accelerate the curing process and make the CIR ...
Moisture damage resistance of grave emulsion manufactured with waste biomass fly ashes
(Springer, 2020)
[Abstract:] PURPOSE: Biomass combustion is an economic and environmentally friendly source of energy with a growing demand. Nevertheless, the environmental management of fly ashes generated during energy production must ...