Buscar
Mostrando ítems 31-40 de 44
Enhancement of curing properties of cold in-place recycling asphalt mixtures by induction heating
(Taylor & Francis Online, 2021)
[Abstract:] In this study, samples of cold in-place recycling mix (CIR) with steel fibres were manufactured and heated by electromagnetic induction. Heating was conducted to accelerate the curing process and make the CIR ...
Characterisation of recycled concrete aggregates when used in asphalt concrete: a technical literature review
(Taylor & Francis Online, 2015)
[Abstract:] Concrete is one of the most widely used construction and building materials. When a concrete structure reaches the end of its life, the demolition waste may be used to produce recycled concrete aggregates (RCA). ...
Short-Term Resilient Behaviour and Its Evolution With Curing in Cold In-Place Recycled Asphalt Mixtures
(Elsevier, 2022)
[Abstract] This study evaluates the short-term resilient behaviour of cold in-place recycled (CIR) asphalt mixtures with bitumen emulsion when they are more similar to non-cohesive granular materials than to conventional ...
Evaluation of water loss and stiffness increase in cold recycled mixes during curing
(Elsevier, 2023)
[Abstract:] Implementing cold solutions is one of the primary efforts in the road sector to counteract CO2 emissions and climate change. Using cold recycled mixtures (CRM) permits the reuse of up to 100% of reclaimed asphalt ...
Performance of hot-mix asphalt involving recycled concrete aggregates
(Taylor & Francis, 2020)
[Abstract:] The incorporation of recycled concrete aggregates (RCA) from construction and demolition waste (CDW) in hot-mix asphalt (HMA) could be a way to promote sustainable construction. This paper describes a laboratory ...
Numerical Simulation of the Stiffness Evolution With Curing of Pavement Sections Rehabilitated Using Cold In-Place Recycling Technology
(Elsevier, 2022)
[Abstract] Cold in-place recycling (CIR) technologies are becoming one of the main bets in the road sector to promote the reduction of greenhouse gas emissions. This technique also contributes to the circular economy, ...
A stress–temperature superposition approach to study the nonlinear resilient behavior of cold recycled mixtures (CRM) with active filler addition
(Elsevier, 2023)
[Abstract:] The asphalt paving sector is currently embracing and enhancing cold mixture technologies to reduce carbon emissions and decarbonize its operations. Cold recycled mixtures (CRM) have proven to be a promising ...
Comparison of accelerated laboratory curing and maturation under uncontrolled conditions of gravel emulsions using a nonlinear weighted least-squares predictive model
(Taylor & Francis, 2022)
[Abstract:] Cold-asphalt mixtures (CAMs) are evolved materials whose mechanical strength increases with their maturation. The relationship between CAM field maturation and laboratory-accelerated cure procedures is not well ...
Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP
(Elsevier, 2022)
[Abstract:] The use of cold recycled asphalt mixtures (CRM) has been soaring during recent years. Reclaimed Asphalt Pavement (RAP) is the main component of CRM, and despite the numerous studies on CRM, the impact of different ...
Compaction and Volumetric Analysis of Cold in-Place Recycled Asphalt Mixtures Prepared Using Gyratory, Static, and Impact Procedures
(Elsevier, 2021)
[Abstract] Compaction is one of the most important factors to be considered while manufacturing laboratory samples of cold in-place recycled (CIR) mixtures.
In this study, the effect of three laboratory compaction ...