Buscar
Mostrando ítems 1-10 de 43
Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates
(Elsevier, 2015)
[Abstract:] The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity ...
Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler
(Elsevier, 2016)
[Abstract:] Certain paper industry wastes display high recycling potential. In this investigation, the feasibility of using green liquor dregs and biomass fly ash from the paper industry as filler in hot-mix asphalt (HMA) ...
Hot mix asphalt using C&D waste as coarse aggregates
(Elsevier, 2012-04)
[Abstract] This article evaluates the possibility of designing hot asphalt mix road pavements using Construction and demolition waste as coarse recycled aggregates. The percentages of recycled aggregates used in the mixtures ...
Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures
(Elsevier, 2014)
[Abstract:] Cold asphalt mixtures (CAM) with 100% recycled aggregates from construction and demolition waste (CDW) were researched to ecologically and economically improve cold asphalt mixtures. The present study indicates ...
Technology: a necessary but not sufficient condition for future personal mobility
(MDPI AG, 2018)
[Abstract:] Technological advances revolutionize industrial processes, science, communications, and our way of life. However, developed societies have reached a stage in which the fascination with technological innovations ...
Geosintéticos en carreteras : planteamientos para su aplicación en las capas de firme
(Entorno Gráfico, 2011)
[Resumen:] Este artículo realiza un acercamiento general a la utilización actual de los geosintéticos en el diseño y construcción de carreteras. Una vez hecho ese acercamiento general se presentan planteamientos para la ...
Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates
(Elsevier, 2015)
[Abstract:] In this study, the nonlinear elastic behavior of bitumen-stabilized materials with emulsion (BSM-E)1 with recycled aggregates from construction and demolition (C&D)2 waste was analyzed using dynamic triaxial ...
Effects of the asphalt penetration grade and the mineralogical composition on the asphalt-aggregate bond
(Taylor & Francis, 2014)
[Abstract:] This investigation analyzes the loss of bonding between the asphalt binder and the aggregate particles produced by water in hot-mix asphalt pavements. Three asphalt penetration grades were used: B35/50, B50/70, ...
Recycled construction and demolition waste in Cold Asphalt Mixtures : evolutionary properties
(Elsevier, 2016)
[Abstract:] The use of Cold Asphalt Mixtures (CAM) usually results in financial and environmental saving, while decreasing pollution and occupational hazards. However, they require a length of curing time to reach their ...
Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste
(Elsevier, 2015)
[Abstract:] The stiffness of cold asphalt mixtures (CAM) with 100% recycled construction and demolition waste aggregates (CDWA) was studied from three different points of view: the indirect tensile stiffness modulus (ITSM), ...