Bioplastic production using wood mill effluents as feedstock
![Thumbnail](/dspace/bitstream/handle/2183/13813/Veiga_MariaCarmen_2011_bioplastic_wood_mill_effluents.pdf.jpg?sequence=4&isAllowed=y)
Use este enlace para citar
http://hdl.handle.net/2183/13813Coleccións
- GI-BIOENGIN- Artigos [106]
Metadatos
Mostrar o rexistro completo do ítemTítulo
Bioplastic production using wood mill effluents as feedstockData
2011Cita bibliográfica
Ben M, Mato T, Lopez A, Vila M, Kennes C, Veiga MC. Bioplastic production using wood mill effluents as feedstock. Water Science and Technology. 2011;63(6):1196-202
Resumo
[Abstract] Fibreboard production is one of the most important industrial activities in Galicia (Spain). Great amounts of wastewater are generated, with properties depending on the type of wood, treatment process, final product and water reusing, among others. These effluents are characterized by a high chemical oxygen demand, low pH and nutrients limitation. Although anaerobic digestion is one of the most suitable processes for the treatment, lately bioplastics production (mainly polyhydroxyalkanoates) from wastewaters with mixed cultures is being evaluated. Substrate requirements for these processes consist of high organic matter content and low nutrient concentration. Therefore, wood mill effluents could be a suitable feedstock. In this work, the possibility of producing bioplastics from to wood mill effluents is evaluated. First, wood mill effluent was converted to volatile fatty acids in an acidogenic reactor operated at two different hydraulic retention times of 1 and 1.5 d. The acidification percentage obtained was 37% and 42%, respectively. Then, aerobic batch assays were performed using fermented wood mill effluents obtained at different hydraulic retention times. Assays were developed using different cultures as inoculums. The maximum storage yield of 0.57 Cmmol/Cmmol was obtained when when the culture was enriched on a synthetic media.
Palabras chave
Acidogenic fermentation
Bioplastics
Polyhydroxyalkanoates
Sequencing batch reactor
Volatile fatty acids
Wood mill effluent
Bioplastics
Polyhydroxyalkanoates
Sequencing batch reactor
Volatile fatty acids
Wood mill effluent
Versión do editor
Dereitos
©IWA Publishing 2011. The definitive peer-reviewed and edited version of this article is published in Water Sciencie and Tecnology,Vol 63 No 6 pp 1196–1202, 2011, doi:10.2166/wst.2011.358, and is available at www.iwapublishing.com.